D10M-36C-T Pressure Cleaner

Product Description

Model: D10M-36C-T

Kohler 10HP Diesel Driven ‘Trailer’ Cold Water MINE SPEC Pressure Cleaner (with 1,000 litre IBC water tank).

A tough trailer-mounted diesel driven cold water pressure cleaner with it’s own on-board economical 1000 litre IBC water tank designed and engineered to work long and hard in tough environments. Due to its reliability, this tough diesel mine spec pressure cleaner is one of the most sought after water blasters.

ThoroughClean Service Agreement: Adding a service agreement to your purchase, guarantees the longevity and reliability of your investment. Not only will a service contract provide you with the ease of mind that if anything happens to your pressure cleaner, it will be taken care of with minimal effort from your side, but the regular servicing and maintenance will hugely reduce the occurrence of breakdowns. Add a service agreement to your quote and we will find you the best solution to satisfy your machine and site requirements.

Service Agreement

Besides being Australian built since 1984, this tough trailer mounted water blaster boasts the following features: 

Engine

Features: Italian made 10.3 HP Kohler KD440 Air Cooled Diesel Engine Push-button electric start Exhaust spark arrestor - AS1019-2000 certified. Wired to shut down on low tank water level. 2:1 reduction gearbox between engine and pump. Vibration mounted on separate subframe. Benefits: This engine was specifically chosen for this machine due to it's reliability and performance, whether it be in the arid parts of Australia or offshore, this Kohler will keep on running. AS certified spark arrestor complies with Mine Spec requirements and allows this pressure cleaner to be legally used on mine sites. Automatic low water level shut down prevents the pump from cavitation and running dry, which is one of the leading causes of pump failure. The gearbox reduces vibrations travelling from the engine to the pump and allows the pump to run at half of the engine speed. Having the engine on a separate, vibration mounted subframe, protects the electrical control box and chassis from long term vibration damage.

Pump

Features: HAWK NPM1525R Triplex Pump rated at 3625 PSI max @ 15 LPM. The pump is de-rated to 3000 PSI Ceramic sleeved, stainless steel piston plunger rods and brass pump head. Low speed pump running at 1450 RPM Pump supported from base. Benefits: The pump is the heart of your pressure cleaner and the most important component. HAWK pumps are the best in the high pressure industry, and are known for their exceptional quality, reliability and efficiency. De-rating the pump ensures that it operates at less than its rated maximum power in order to prolong its life. Low speed pumps and their seals last much longer, and are also less vulnerable to the effects of 'dry running' compared to a high speed pump. Pump weight supported from the bottom to minimize strain on drive shaft & gearbox

	Frame
	Features & Benefits: Heavy Duty 4x4 style, fully hot dipped galvanised, low vibration steel chassis Separate vibration mounted subframe IBC tank hold down brackets Land cruiser style wheels on 2-ton axle with spare wheel. LED side clearance lights High Pressure hose is also frame mounted – not mounted directly on the pump – so no pulling on vulnerable hose fittings when in operation.

	1000L IBC Water Tank
	Features & Benefits: 1000L White IBC water tank with float switch to shut motor down on low water supply, protects the pump against dry running and extends pump life to the maximum. Creates a water buffer at start-up when water supply hoses are often empty. By-pass valve diverts water back into tank during by-pass – so water does not heat up during by-pass mode.

By-Pass Valve

Features: Features an Italian made K7 bypass Valve Soft acting By-pass valve Zero pressure stored in hose when trigger is released By-pass valve is frame mounted Benefits: The K7 By-Pass Valve is a soft-acting which means the pressure comes on gradually – no kick-back on the gun when you pull the trigger. This makes it safe and seals last longer. Zero pressure is stored in hose when the gun’s trigger is released or unit is switched off. This unique feature makes it safe and again less wear and tear on by-pass valve, hose and gun seals. The By-pass valve is frame-mounted, not hanging off the pump where it amplifies vibration causing extra stress on the drive gearbox and drive shafts.

	Dual Water Filters
	Features & Benefits: This unit has 2 large capacity heavy duty industrial water filters Stainless steel mesh that protects the pump’s ceramic pistons against water line debris and extending pump life. NOT just a single water filter or strainer that blocks up easily and causes pump cavitation.

	Control Box
	Features & Benefits: Marine Grade 316 Stainless Steel Enclosure Start-Push button On-Off switch Hour Meter Engine Fault light Water Fault light Emergency stop

Hose, Gun & Pressure Gauge

Features & Benefits: 30m 3/8″ double wire R2 HP Hose rated to 5000 PSI with stainless steel fittings. (4X burst rating) Mounted on heavy duty galvanised hose reel Hose swivel prevents kinks and hose stiffness while pressure cleaning making it operator friendly Tough Italian made 4060 PSI gun with Stainless Steel lance with moulded hand grip 900mm Insulated stainless steel lance Stainless Steel BSP/NPT Nozzle Holder fitted to the lance with a 1/4″ stainless steel nozzle with 15 degree fan for general cleaning – correctly sized for pressure and flow Stainless Steel pressure gauge – liquid filled to protect against pressure spikes

Disclaimer: All images are a representation only and are not to scale. Although care has been taken to ensure the accuracy, completeness and reliability of the information provided, due to ongoing product development and improvements, products may vary from this data. The user of the information agrees that the information is subject to change without notice.