Product Description
Model: P13C-36C
Honda Petrol Driven 13HP Cold Water Pressure Cleaner built to Commercial Spec, 3625 PSI Maximum Pump Pressure, 17 LPM Flow.
Commercial Spec: High Speed pump, no gearbox, HP hose and by-pass valve are pump mounted (not frame mounted), water filter (others in this category are usually only fitted with inline strainers – notorious for causing pump cavitation and failure as they block up).
Industrial Spec: Low speed pump gearbox driven via 2:1 heavy duty gearbox, by-pass valve and hose connections mounted off-pump (less vibration, no pulling on pump fittings), water filter.
Rental Spec: Same as Industrial, but with heavy duty galvanized frame incorporating a heavy duty Hose Reel with 30 meters thick-walled R2-rated hose, an AquaTech water break tank with low level auto engine shut-down preventing pump cavitation and damage, a LubeBuddy to ensure pump is always well lubricated, extra large water filter.
| Engine |
 | Features: - Genuine Honda GX390 13 HP Air Cooled Petrol Engine
- Electric or Recoil start
- Wired to shut down on low tank water level. (When fitted with water breaktank)
- Ball bearing supported crankshaft
- Overhead Valve design
Benefits:
This engine was specifically chosen for this machine due to it's reliability and performance, whether it be in the arid parts of Australia or offshore, this Honda will keep on running.- Automatic low water level shut down prevents the pump from cavitation and running dry, which is one of the leading causes of pump failure.
- The ball bearing supported crankshaft allows for greater stability.
- OHV design allows for increased efficiency and optimal power transfer.
|
| Pump |
 | Features: - HAWK NPM1725 Triplex Pump rated at 3625 PSI max @ 17 LPM.
- The pump is de-rated to 3500 PSI
- Ceramic sleeved, stainless steel piston plunger rods and brass pump head.
- Low speed pump running at 1450 RPM
- A frame mounted slave oil tank triples oil supply to the pump. (When fitted with oil tank)
Benefits:
The pump is the heart of your pressure cleaner and the most important component. HAWK pumps are the best in the high pressure industry, and are known for their exceptional quality, reliability and efficiency. - De-rating the pump ensures that it operates at less than its rated maximum power in order to prolong its life.
- Low speed pumps and their seals last much longer, and are also less vulnerable to the effects of 'dry running' compared to a high speed pump.
- The oil slave tank prevents oil starvation of the pump and was incorporated due to operators not checking oil levels daily.
|
| Frame |
 | Features & Benefits: - Fully hot dipped galvanised, fully welded, low vibration steel frame
- Central lifting bar
- 4 Large flat free wheels for easy rolling over rough terrain and vibration absorption
- Thick axles (27mm) to prevent bending
- Water supply hose and high pressure hose is frame mounted – not mounted on the pump where you are pulling on vulnerable pump fittings while working.
- Includes brackets for gun, reel and oil tank mounts
|
| By-Pass Valve |
 | Features & Benefits: - Features an Italian made HAWK VBA Unloader valve
- This is not a soft-acting by-pass valve and it is fitted straight onto the pump
- A Thermoshield dump valve automatically dumps hot water to the ground when machine is left in by-pass too long. (Water temperature rises in by-pass – when the machine is running but trigger not pulled)
|
| Filter |
 | Features & Benefits: - A large capacity heavy duty industrial water filter
- Stainless steel mesh that protects the pump’s ceramic pistons against water line debris and extending pump life.
- NOT just a single water filter or strainer that blocks up easily and causes pump cavitation
|
| Hose, Gun & Pressure Gauge |
 | Features & Benefits: - 20m 3/8″ double wire R2 HP Hose rated to 5000 PSI with stainless steel fittings. (4X burst rating)
- Hose swivel prevents kinks and hose stiffness while pressure cleaning making it operator friendly
- Tough Italian made 4060 PSI gun with Stainless Steel lance with moulded hand grip
- 900mm Insulated stainless steel lance
- Stainless Steel BSP/NPT Nozzle Holder fitted to the lance with a 1/4″ stainless steel nozzle with 15 degree fan for general cleaning – correctly sized for pressure and flow
- Stainless Steel pressure gauge – liquid filled to protect against pressure spikes
|
Disclaimer: All images are a representation only and are not to scale. Although care has been taken to ensure the accuracy, completeness and reliability of the information provided, due to ongoing product development and improvements, products may vary from this data. The user of the information agrees that the information is subject to change without notice.
