Product Description
Model: E3R-22C
This Electric Pressure Cleaner is powered by an Italian 3HP (2.2kW) – 240 Volt motor. It is built to Rental Spec, and features a HAWK pump.
This strong Heavy Duty Rental spec electric pressure cleaner has been designed to last many-many years – in a rental environment with heavy demand. Ideal for general cleaning like drive ways, patios, decks, houses, automotive cleaning, etc. It is also the best clean you will get from a 240 volt unit of any kind – giving you maximum pressure and flow from a 240 volt, 10 Amp power supply.
 | ThoroughClean Service Agreement:
Adding a service agreement to your purchase, guarantees the longevity and reliability of your investment. Not only will a service contract provide you with the ease of mind that if anything happens to your pressure cleaner, it will be taken care of with minimal effort from your side, but the regular servicing and maintenance will hugely reduce the occurrence of breakdowns.
Add a service agreement to your quote and we will find you the best solution to satisfy your machine and site requirements.
|
| Service Agreement |
What makes this a great electric pressure cleaner?
Besides being Australian built since 1984, this tough portable water blaster boasts the following features:
Electrical Switch
AS Approved heavy duty weatherproof electrical 20A 2-pole ON/OFF switch
| Motor |
 | Features: - Italian made TecnoMec, 3 HP (2.2kW) electric motor
- Class ‘H’ wound.
- 240 Volt
- 15 Amp capacity - de-rated to 10 Amp load.
- 10m of 15amp electric cord with 10Amp plug
- Fully rewindable
Benefits:
This motor was specifically chosen for this machine due to it's reliability and performance.- De-rating the motor to 10Amp load from 15 load increases the lifetime expectancy
- Derating the motor to allows the use of any 240 Volt-10amp socket
- Machine is protected against water coming in to the electrics
- Motor can be repaired
|
| Pump |

 | Features: - HAWK HD1115 Triplex Pump rated at 2200 PSI max @ 11 LPM.
- The pump is de-rated to 1100-1500 PSI
- Ceramic sleeved, stainless steel piston plunger rods and brass pump head.
- Low speed pump running at 1450 RPM
- Fully serviceable, repairable & re-buildable pump
Benefits:
The pump is the heart of your pressure cleaner and the most important component. HAWK pumps are the best in the high pressure industry and are known for their exceptional quality, reliability and efficiency. - De-rating the pump ensures that it operates at less than its rated maximum power in order to prolong its life.
- Low speed pumps and their seals last much longer and are also less vulnerable to the effects of 'dry running' compared to a high speed pump.
|
| Frame |
 | Features & Benefits: - Galvanised fully welded, low vibration steel frame,
- Central lifting bar
- 4 flat free wheels for easy rolling over rough terrain and vibration absorption
- Thick axles (23mm) to prevent bending
- Water supply hose is frame mounted – not mounted on the pump where you are pulling on vulnerable pump fittings while working.
- High Pressure hose is also frame mounted – not mounted directly on the pump – so no pulling on vulnerable hose fittings when in operation.
|
| By-Pass Valve |
 | Features: - Features an Italian made K7 bypass Valve
- Soft acting By-pass valve
- Zero pressure stored in hose when trigger is released
- By-pass valve is frame mounted
Benefits:
- The K7 By-Pass Valve is a soft-acting which means the pressure comes on gradually – no kick-back on the gun when you pull the trigger. This makes it safe and seals last longer.
- Zero pressure is stored in hose when the gun’s trigger is released or unit is switched off. This unique feature makes it safe and again less wear and tear on by-pass valve, hose and gun seals.
- The By-pass valve is frame-mounted, not hanging off the pump where it amplifies vibration causing extra stress on the drive gearbox and drive shafts.
|
| Filter |
 | Features & Benefits: - A large capacity heavy duty industrial water filter
- Stainless steel mesh that protects the pump’s ceramic pistons against water line debris and extending pump life.
- NOT just a single water filter or strainer that blocks up easily and causes pump cavitation
|
| Hose, Gun & Pressure Gauge |
 | Features & Benefits: - 20m 3/8″ double wire R2 HP Hose rated to 5000 PSI with stainless steel fittings. (4X burst rating)
- Hose swivel prevents kinks and hose stiffness while pressure cleaning making it operator friendly
- Tough Italian made 4060 PSI gun with Stainless Steel lance with moulded hand grip
- 900mm Insulated stainless steel lance
- Stainless Steel BSP/NPT Nozzle Holder fitted to the lance with a 1/4″ stainless steel nozzle with 15 degree fan for general cleaning – correctly sized for pressure and flow
- Stainless Steel pressure gauge – liquid filled to protect against pressure spikes
|
Attention: The internal data of table “optional-extras-1” is corrupted!
Disclaimer: All images are a representation only and are not to scale. Although care has been taken to ensure the accuracy, completeness and reliability of the information provided, due to ongoing product development and improvements, products may vary from this data. The user of the information agrees that the information is subject to change without notice.