Kohler 10HP Diesel Driven Cold Water Pressure Cleaner (trailer mounted with 1,000 litre Poly water tank) built to RENTAL SPEC. Features a HAWK pump: NPM1525R at 3625 PSI Maximum Pump Pressure, 15 LPM
This ‘3000 psi’ pressure cleaner was designed and engineered for reliability and strength with the Hire Market in mind. “You know if a tradie is not going to be able to break it – is has to be tough!”
This model is also available in full MINE SPEC, but has the following Mine Spec features already included:
- A Stone Guard
- A Battery Isolator Switch
- An Emergency Stop
- An Engine Drip Tray
- An Exhaust Spark Arrestor
Build Spec: Robust Rental Specification
Engine: Kohler 10.3 hp KD440 Electric Start Diesel Engine – Air-Cooled
Pump: HAWK NPM1525 rated 3625 PSI (250 bar) @ 15 LPM
Working Pressure: 2500 – 3200 PSI – Your choice! 3600 PSI possible but engine running at high revs which is not advised long term.
Tank: 1,000 litres Poly
Hose: 30 meters
Size: 410 x 185 x 180 H (cm)
Weight: 700 kg (empty)
10hp Electric Start Kohler Diesel Driven Pressure Cleaner with tough HAWK NPM1525R pressure pump rated 3625 PSI, 15 LPM with operating pressure set at your requirement between 2500 to 3600 PSI @ 15 LPM.
This machine is also available in a Mine Spec: D10M-36C-T (IBC tank) or D10M-36C-TO (Oval poly tank) with full BMA Mine Spec features.
Besides being Australian built since 1984, this tough Trailer-Mounted Water Blaster boasts the following features:
– A tough heavy duty hot dip galvanized 4×4 style steel trailer frame with heavy duty Jockey wheel, mechanical brakes incorporated in the wheels and a 2.5ton axle
– Landcruiser 4×4 style tyres with an extra mounted spare wheel.
– Engine bay stone guard to protect components against rocks and stones during travel.
– A 1,000 litre red Poly water tank with low water level auto-engine shut-down preventing pump dry running and damage
– A built-in super heavy duty hose reel (with 5-year warranty) with 30 meters HP hose and spring-loaded barrel bolt to lock it in place during travel.
– A frame-mounted high pressure gun holster
– A slave oil tank connected to the pump – increasing the oil supply to the pump by more than three-fold and ensuring pump stays well lubricated even if operators forget to check oil level daily and decreasing chances of pump damage.
-IMPORTANT: Pump-gearbox-engine combo and battery are mounted on a galvanized sub-frame – vibration mounted on the main frame. This protects fittings, wiring, components, etc from long-term vibration damage and extends water blaster life & ensures uninterrupted operation when you need it most!
– An electric start 10.3 hp Kohler Diesel engine (KD440) – reliable and tough!
– A low speed HAWK NPM1525R pressure pump – the cleaning industry’s best pump! It is a triplex pump with brass head, stainless steel piston plungers and ceramic pistons. Comes with 12-month warranty even for industrial use. (Stainless steel pumps are also available for marine applications.)
– A tough 2:1 gearbox drives the pump at 1450 RPM.
– Two Industrial water filters with stainless steel mesh protect the pump and seals from waterline debris and extends pump life – not just an inline strainer which blocks up and causes pump cavitation – one of the big reasons why pumps fail
– It features the unique K7-2 by-pass valve (unloader valve) which several advantaged above other by-pass valves. It is soft acting – pressure comes on gradually – not with kick-back. Advantages are that it is safe because it also does not store pressure in the HP hose even when the unit is shut down like other by-pass valves do. Because there is hardly any kick-back on the gun, it doesn’t throw you off-balance when standing on elevated platforms or in awkward positions, it causes less hand strain, it limits pressure spikes so less wear and tear on seals, hoses, by-pass valve.
– The unit comes with 30 meters double wire, thick-walled high pressure hose (R2-rated to 4785 PSI) and a tough Italian-made HP gun with stainless steel lance which incorporates a moulded hand grip, and a stainless steel HP nozzle with a 15 degree fan.
– It is fitted with a heavy duty stainless steel pressure gauge
– IMPORTANT: The High Pressure hose is also NOT fitting straight onto the pump, but also on the frame – again no pulling on pump fittings!
– IMPORTANT: The K7-2 by-pass valve is not hanging off the pump where it puts extra strain on the drive shaft and gearbox and where it amplifies vibration – it is fitted on the trailer frame.
These above features as well as the low water level engine shut-down, the slave oil tank and the vibration-mounted sub-frame ensure lots of extra years of smooth running and life out of your water blaster!
Optional engines: Yanmar, Kubota (Please enquire specifically if you prefer specific brand of engine). Also available as 13 HP Honda Petrol Driven models with simalar pressure and flow.
|Heavy Duty – all steel hot dip galvanized 4×4 frame/chassis||Preventing rust in harsh conditions increasing life almost indefinitely|
|All steel galvanized hose reel with 50 m capacity – 30 m HP hose comes as standard||Toughest hose reel on the market! Designed and manufactured by ThoroughClean.|
|Engine & pump vibration mounted on sub-frame||Protects components from wear due to vibration and extends life|
|Heavy duty hot dip galvanized trailer with 2 ton axle||Built to withstand harsh mine site and tough off-road conditions|
|Land Cruiser rims and tyres (15″)||To handle tough off-road conditions with easy – fits also on commercial vehicles|
|Spare wheel on mounted bracket|
|Comes with 1,000 litres built-in red Poly water tank.||Having your own water supply enables you to do any job – anywhere!|
|ENGINE – DIESEL|
|Proven Reliable 10.3 HP Kohler Diesel Engine with keyed electric start||Robust design and low running cost|
|Air Cooled Single Cylinder|
|Kohler original Air Filter||Ensure clean air flow into engine – even in dusty environments|
|Kohler has built-in Fuel Tank|
|Over-sized, heavy duty, 600 amp battery with heavy duty leads||Allow multiple quick succession re-starts|
|Super heavy duty battery regulator – upgraded||Allows charging of over-sized battery|
|Battery Box||Protects battery and terminals from elements and accidental shorting between poles|
|Battery vibration mounted||Protects battery and leads from long-term damaging effects of engine vibration and rough terrain|
|Stainless steel control box with push-button start, E-stop, hour meter, fault indicator lights||User-friendly controls|
|No PLC boards||For easy maintenance by any electrician on any remote site|
|HAWK NPM1525 – 3625 PSI max. 15 LPM||The world’s best pump in the pressure cleaning industry – renowned for its quality, efficiency and reliability.|
|*De-rated to 3000 PSI as standard||Running pump below maximum design limits extends pump life dramatically|
|Ceramic sleeved 316 s/steel pistons and s/steel camshaft. Brass pump head||Ceramic resist premature wear and withstands high internal temperatures and ensures smooth operation|
|Slave Oil Tank – tripling oil supply to pressure pump||Keeps pump well lubricated and prevents dry running – exting life significantly|
|Spare parts and seals kept in stock||Completely repairable /rebuildable|
|Glycerin filled stainless steel pressure gauge to twice safe working pressure|
|K7-2 (zero PSI) by-pass valve||Safest by-pass valve available. Stores zero pressure in hoses and gun when trigger is relesed or unit switched off.|
|Soft acting low to high PSI||Smooth action protects gun. No kick-back.|
|Zero PSI stored down-stream in HP accessories during by-pass. (No pressure in hose whentrigger is released.)||Less wear on seals, hose and gun when not in use. Reduces the risk of a bursting hose. No risk of HP injury due to accidental triggering of gun when shut down.|
|SUCTION / WATER SUPPLY|
|Two over-sized water filters (3/4″)||Prevents pump damage and extends pump life|
|1,000 litre built-in water tank (Poly)||Ensures remote water supply for at least an 1-hour continuous operation on 18 LPM pump as example|
|Low water float switch||Auto engine shut-down prevents pump running dry|
|30 meters High Pressure Hose||R2, 160ºC – 4785 PSI SWP & 19000 PSI burst rating. Extra thick rubber wall to protect hose against damage|
|All-steel heavy duty hot dip galvanized hose reel||Toughest in Australia – and Aussie-made!|
|Italian-made quality dry shut off gun (rated to 300 BAR) with 900 mm s/steel lance & s/steel HP jet|
|Hose end sleeved with protecting canvass||Protects operator against injury in case of hose failure or HP water leak. Also protects hose in high use area|
|SAFETY/ PROTECTION FEATURES|
|Using safest K7-2 by-pass valve|
|Chassis ‘ruggedized’ and hot dip galvanized||Will withstand rough handling and abuse|
|Slave oil tank||Keeps the heart of your investment lubricated at all times|
|Vibration mounted battery box||Prevents battery is shaken to bits during travel.|
|Vibration mounted motor gearbox & pump||Protects components against long-term vibration damage|
|Over-sized industrial quality water filter/s||Protects pump against waterline debris and nozzle from blocking up|
|Low water level engine shut-down|
|Mechanical brakes built into trailer hitch|
|Fully serviceable engine, pump & by-pass valve|
|Fully repairable engine, pump & by-pass valve|
|Fully re-buildable engine, pump & by-pass valve|